Table of Contents
Stainless Steel UNS N08904 Sheets are extensively used in electronics, the microwave condenser tube sector, wave guides, etc. Nandini Steel is a well-known stockist and manufacturer of these sheets. Condenser Plates, Weld Torch Tips, Condensers, Heat Exchanger Tubes, Evaporator Tubes, and other components regularly use it. Additionally, they are utilised in valve bodies, pressure vessels, oil refinery pump impellers, distiller tubes, ferrules, and evaporators, among other things. They are widely used for boat hulls, salt water pipe fittings, tube sheet for salt water service, etc. in the MARINE industries. Salt water piping systems, hot water tanks, propeller sleeves, salt water baffles, ship hulls, and water hoses are further applications for stainless steel N08904 sheets. Superior workability, strength, and solder wettability result from the various characteristics, making them the best.
Although it is easy to bend and has a high level of corrosion resistance, there is a concern with its poor corrosion-fatigue strength. These stainless steel UNS N08904 perforated sheets exhibit corrosion resistance similar to copper, superior all-around strength, and higher fatigue strength when first introduced. High strength sheets are used in applications where both these characteristics are essential because they offer higher strength and durability while maintaining an elevated level of corrosion resistance. Such sheets that have been manufactured easily and in accordance with a number of specifications display adequate physical and mechanical qualities.
Specifications | ASTM A240 / ASME SA240 |
---|---|
Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
Size Range | Cold rolled Sheet 0.5-6.4 mm Hot rolled Sheet 3.0–10.0 mm |
Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Thickness | 0.3 mm to 120 mm |
International Standard | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
Tolerances (width / thickness) | EN 10258/ DIN 59381) EN 10151 EN 10088 |
Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Surface Finish | Definition | Application |
---|---|---|
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
Thickness | Thickness | Size Range | Surface Area per Unit weight | Approx Weight per Sheet | ||
---|---|---|---|---|---|---|
inches | mm | lbs/ft² | kg/m² | lbs | kg | |
0.015 | 0.381 | 36 x 96 | 0.630 | 3.07566 | 15.12 | 6.84936 |
0.015 | 0.381 | 36 x 120 | 0.630 | 3.07566 | 18.90 | 8.5617 |
0.0178 | 0.45212 | 36 x 96 | 0.756 | 3.690792 | 18.15 | 8.22195 |
0.0178 | 0.45212 | 36 x 120 | 0.756 | 3.690792 | 22.68 | 10.27404 |
0.0178 | 0.45212 | 48 x 96 | 0.756 | 3.690792 | 24.19 | 10.95807 |
0.0178 | 0.45212 | 48 x 120 | 0.756 | 3.690792 | 30.24 | 13.69872 |
0.0235 | 0.5969 | 30 x 96 | 1.008 | 4.921056 | 20.16 | 9.13248 |
0.0235 | 0.5969 | 30 x 120 | 1.008 | 4.921056 | 25.20 | 11.4156 |
0.0235 | 0.5969 | 36 x 96 | 1.008 | 4.921056 | 24.19 | 10.95807 |
0.0235 | 0.5969 | 36 x 120 | 1.008 | 4.921056 | 30.24 | 13.69872 |
0.0235 | 0.5969 | 36 x 144 | 1.008 | 4.921056 | 36.29 | 16.43937 |
0.0235 | 0.5969 | 48 x 96 | 1.008 | 4.921056 | 32.26 | 14.61378 |
0.0235 | 0.5969 | 48 x 120 | 1.008 | 4.921056 | 40.32 | 18.26496 |
0.0235 | 0.5969 | 48 x 144 | 1.008 | 4.921056 | 48.39 | 21.92067 |
0.0291 | 0.73914 | 30 x 96 | 1.260 | 6.15132 | 25.20 | 11.4156 |
0.0291 | 0.73914 | 30 x 120 | 1.260 | 6.15132 | 31.50 | 14.2695 |
0.0291 | 0.73914 | 36 x 96 | 1.260 | 6.15132 | 30.24 | 13.69872 |
0.0291 | 0.73914 | 36 x 120 | 1.260 | 6.15132 | 37.80 | 17.1234 |
0.0291 | 0.73914 | 36 x 144 | 1.260 | 6.15132 | 45.37 | 20.55261 |
0.0291 | 0.73914 | 48 x 96 | 1.260 | 6.15132 | 40.32 | 18.26496 |
0.0291 | 0.73914 | 48 x 120 | 1.260 | 6.15132 | 50.41 | 22.83573 |
0.0291 | 0.73914 | 48 x 144 | 1.260 | 6.15132 | 60.49 | 27.40197 |
0.0355 | 0.9017 | 30 x 96 | 1.512 | 7.381584 | 30.24 | 13.69872 |
0.0355 | 0.9017 | 30 x 120 | 1.512 | 7.381584 | 37.80 | 17.1234 |
0.0355 | 0.9017 | 36 x 96 | 1.512 | 7.381584 | 36.29 | 16.43937 |
THICKNESS IN MM | SIZE IN MM | WEIGHT KG/M2 | ||
2000 X 1000 | 2500 X 1250 | 3000 X 1500 | ||
0.18 | 2.88 | - | - | 1.44 |
0.20 | 3.20 | - | - | 1.60 |
0.22 | 3.52 | - | - | 1.76 |
0.24 | 3.84 | - | - | 1.92 |
0.27 | 4.32 | - | - | 2.16 |
0.28 | 4.48 | - | - | 2.24 |
0.32 | 5.12 | - | - | 2.56 |
0.38 | 6.08 | - | - | 3.04 |
0.44 | 7.04 | 11.00 | - | 3.52 |
0.50 | 8.00 | 12.50 | - | 4.00 |
0.56 | 8.96 | 14.00 | - | 4.48 |
0.63 | 10.08 | 15.75 | - | 5.04 |
0.75 | 12.00 | 18.75 | - | 6.00 |
0.88 | 14.08 | 22.00 | - | 7.04 |
1.00 | 16.00 | 25.00 | 36.00 | 8.00 |
.1.13 | 18.08 | 28.25 | 40.00 | 9.04 |
1.25 | 20.00 | 31.25 | 45.00 | 10.00 |
1.38 | 22.03 | 34.50 | 50.00 | 72.00 |
1.50 | 24.00 | 37.50 | 54.00 | 12.00 |
1.75 | 28.00 | 43.75 | 63.00 | 14.00 |
2.00 | 32.00 | 50.00 | 72.00 | 16.00 |
2.25 | 36.00 | 56.25 | 81.00 | 18.00 |
2.50 | 40.00 | 62.50 | 90.00 | 20.00 |
2.75 | 44.00 | 68.75 | 99.00 | 22.00 |
3.00 | 48.00 | 75.00 | 108.00 | 24.00 |
3.25 | 52.00 | 81.25 | 117.00 | 26.00 |
3.50 | 56.00 | 87.50 | 126.00 | 28.00 |
3.75 | 60.00 | 93.75 | 135.00 | 30.00 |
4.00 | 64.00 | 100.00 | 144.00 | 32.00 |
4.25 | 68.00 | 106.25 | 153.00 | 34.00 |
4.50 | 72.00 | 112.50 | 162.00 | 36.00 |
5.00 | 80.00 | 125.00 | 180.00 | 40.00 |
5.50 | 88.00 | 137.50 | 198.00 | 44.00 |
6.00 | 96.00 | 150.00 | 216.00 | 48.00 |
6.50 | 104.00 | 162.50 | 234.00 | 52.00 |
7.00 | 112.00 | 175.00 | 252.00 | 56.00 |
7.50 | 120.00 | 187.50 | 270.00 | 60.00 |
8.00 | 128.00 | 200.00 | 288.00 | 64.00 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Cu |
UNS N08904 | 0.020 max | 2.00 max | 1.00 max | 0.040 max | 0.030 max | 19.00 – 23.00 | 4.00 – 5.00 max | 23.00 – 28.00 | 1.00 – 2.00 |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.95 g/cm3 | 1510 °C (2750 °F) | Psi – 75,000 , MPa – 485 | Psi – 40,000 , MPa – 275 | 20 % |
We Manufacturer, Supplier and Exporter ASTM A240 UNS N08904 Sheets for wide range of industries. Some of the examples are : – Automobiles, Textiles, Shipbuilding, Power Plants, Constructions, Pharmaceuticals, Chemicals, Refineries, Food & Beverages, Sugar Mills, Architectural applications, Dairies & Breweries, Nuclear, Railways, Petrochemicals, Paper & Pulp Industries, Water Pipelines etc.